Bambu Lab X2D Combo vs Bambu Lab P2S Combo

How they differ in real use

Built from our multi color 3d printers scoring, each product's published specifications, and verified owner feedback — not hands-on testing.

Both the Bambu Lab X2D Combo and the Bambu Lab P2S Combo made our Top 5 Multi-Color 3D Printers Under $1,000, at #1 (best overall) and #2. The strongest multi-color printer under $1,000: a second nozzle means a two-color or two-material print alternates nozzles instead of purging, and Domechy measured about 12 g of waste on a two-color print that cost the P2S about 68 g. The Combo's AMS 2 Pro dries spools and handles four colors, and the X2D adds the list's only actively heated chamber (65°C), a 1,000 mm/s toolhead and a 120°C bed, so nylon and polycarbonate are within reach. It ranks above the P2S Combo because it keeps the same Bambu Studio software and AMS ecosystem while wasting less filament and handling more materials, for about $120–150 more. Its limits: the AMS feeds only the main nozzle, so beyond two colors it purges like a single-nozzle printer (about 107 g against the P2S's 172 g on Domechy's four-color print), and the Bowden-fed second nozzle is slower and strings more. The most complete single-nozzle multi-color package and the best pick sold on Amazon US: the AMS 2 Pro dries spools while it prints, expands from 4 to 20 colors with extra AMS units, and Bambu Studio with the MakerWorld library makes painting and slicing a multi-color model easier than on any non-Bambu pick. The enclosed CoreXY printer (600 mm/s, hardened-steel 300°C nozzle, a chamber that retains about 50°C) also handles ABS and ASA. It ranks below the X2D because every color change purges through its single nozzle and its chamber is not actively heated. It ranks above the Snapmaker U1 because the U1 stops at four colors, has an open top and no drying, while the P2S gives up only purge waste and slower color changes in exchange for a more polished, more expandable system at a similar price.

We score multi-color 3d printers under $1,000 on Multi-Color System (30%), Print Quality & Speed (20%), Material Capability (15%), Ease of Use & Software (20%) and Value (15%). On that basis the Bambu Lab X2D Combo totals 9.1 out of 10 and the Bambu Lab P2S Combo 8.9. The widest gap is Material Capability, where the Bambu Lab X2D Combo scores 10 against 8 for the Bambu Lab P2S Combo: which filaments it handles well, based on enclosure, chamber heat retention, maximum nozzle temperature and hardened-steel parts for ABS, ASA and fiber-filled filaments. Print Quality & Speed also separates them: 10 for the Bambu Lab X2D Combo versus 9 for the Bambu Lab P2S Combo. The Bambu Lab P2S Combo claws back ground on Ease of Use & Software and Value.

On paper, the specifications that actually differ: Multi-Color System: Dual nozzle + AMS 2 Pro (filament swapping on the main nozzle) on the Bambu Lab X2D Combo versus AMS 2 Pro (single-nozzle filament swapping) on the Bambu Lab P2S Combo; Max Colors: 4 in the AMS 2 Pro + 1 external spool; more with extra AMS units on the Bambu Lab X2D Combo versus 4 included; up to 20 with extra AMS units on the Bambu Lab P2S Combo; Toolheads / Nozzles: 1 toolhead, 2 nozzles on the Bambu Lab X2D Combo versus 1 toolhead, 1 nozzle on the Bambu Lab P2S Combo; Build Volume: 256 × 256 × 260 mm (235.5 × 256 × 256 mm with both nozzles) on the Bambu Lab X2D Combo versus 256 × 256 × 256 mm on the Bambu Lab P2S Combo; Max Speed: 1,000 mm/s on the Bambu Lab X2D Combo versus 600 mm/s on the Bambu Lab P2S Combo; Enclosure / Chamber: Fully enclosed; active chamber heating to 65°C on the Bambu Lab X2D Combo versus Fully enclosed; retains about 50°C, no active heater on the Bambu Lab P2S Combo. They match on Filament Drying and Max Nozzle Temp.

The Bambu Lab X2D Combo lists at $899; the Bambu Lab P2S Combo's current price is on the merchant page. Owners praise the Bambu Lab X2D Combo for two nozzles: two-color and two-material prints swap nozzles instead of purging, cutting waste and print time against the single-nozzle P2S and the only actively heated chamber in this list (65°C), with a 120°C bed for nylon and polycarbonate; the most common complaint is the AMS 2 Pro feeds only the main nozzle; the second nozzle needs an external spool or a second AMS. Owners praise the Bambu Lab P2S Combo for built-in filament drying in the AMS 2 Pro (shared only with the X2D Combo here) and expansion from 4 to 20 colors with extra AMS 2 Pro and AMS HT units; the most common complaint is purge waste on every color change, which on prints with many color changes can rival the weight of the model itself.